Hangang Insert bag for mini / Rover bag
The hangang insert bag is cushioned like a camera bag. This is a 'bag in bag' that is used inside the hangang mini bag & Rover bag. You can ride with confidence even with a camera or digital equipment in a mini bag. This bag has handles and a D-ring for shoulder straps, so you can use it separately.
- Material: Washed nylon, nylon Rip, hook tape, EVA, PE
- dimension: Width × Length × Height (excluding cover): 25×20×14.5 (cm)
- Weight: 279 g (230g excluding partitions)
- color: Olive, Black
※ The lining is a soft material to protect the surface of the equipment. And you can use the hook tape of the partition to place it as you want.
※ There are two pockets and a small ring on the front.
Place of origin Seoul, Korea
Manufacturer Practico Arte.
Brand Practico Arte.
Weight 1.31kg
This item has been added to your cart.
Should I order it along with the items in my shopping cart?

"I'm so nervous when I run with a camera or digital device"
"When I ride a bike, I wrap my tablet in a towel and carry it around."










Material
washed nylon, nylon lip, hook tape, EVA, PE
Size and Weight
Width × Height × Depth (excluding cover): 25 × 20 × 14.5 (cm)
Weight: 279 g (230 g excluding partitions)
※ It can be measured differently depending on the criteria and methods of measurement.






<Hangang Insert bag> is a tight size for maximum use of space in a mini bag. It can be a little tight when you put it in and out, but if you refer to the following, you can put it in and out without difficulty.
- First, open the zipper tips on both sides of the Han River mini bag and open the zipper.
- As shown in the picture, hold one side of the Hangang Insert bag and tilt the other side first.
- Push the other side all the way to the floor and stretch the inside well to shape it.
- When pulling out, hold the front and back handles of the insert bag together and pull it up, alternately tilting it left and right.














It contains three pads (2 T-shaped pads, 1 square pad)
- The T-shaped pad is a divider. It can split the space, and when you bend and attach it to the floor, it supports the lens side of the camera.
- Attach the square pad to the top of the insert bag like a lid to protect the top of the devices in the bag. (Prevent splashing upward when crossing the safety jaw, etc.) Attach the square pad to the floor to further reduce the impact transmitted to the bag when riding.

"I'm so nervous when I run with a camera or digital device"
"When I ride a bike, I wrap my tablet in a towel and carry it around."










Material
washed nylon, nylon lip, hook tape, EVA, PE
Size and Weight
Width × Height × Depth (excluding cover): 25 × 20 × 14.5 (cm)
Weight: 279 g (230 g excluding partitions)
※ It can be measured differently depending on the criteria and methods of measurement.






<Hangang Insert bag> is a tight size for maximum use of space in a mini bag. It can be a little tight when you put it in and out, but if you refer to the following, you can put it in and out without difficulty.
- First, open the zipper tips on both sides of the Han River mini bag and open the zipper.
- As shown in the picture, hold one side of the Hangang Insert bag and tilt the other side first.
- Push the other side all the way to the floor and stretch the inside well to shape it.
- When pulling out, hold the front and back handles of the insert bag together and pull it up, alternately tilting it left and right.














It contains three pads (2 T-shaped pads, 1 square pad)
- The T-shaped pad is a divider. It can split the space, and when you bend and attach it to the floor, it supports the lens side of the camera.
- Attach the square pad to the top of the insert bag like a lid to protect the top of the devices in the bag. (Prevent splashing upward when crossing the safety jaw, etc.) Attach the square pad to the floor to further reduce the impact transmitted to the bag when riding.